New & Remanufactured Hydraulic Pumps | Hydraulic Motors | Parts & Valves
Moore Pumps is a second generation, family owned business that believes in going the extra mile in order to meet or exceed the needs of their customers. We know that every second counts when a critical piece of machinery goes down and we do whatever it takes to get your part to you as fast as possible.
Our hydraulic pumps are used on every U.S. carrier in the fleet.
"I must compliment this family and their business!! They are very professional, ensure every pump that exits their business is of the highest quality, expedite every order (even ensure my pump work is completed with 24 hrs or less), courteous, respectful, and accommodating to their customers. The Moore family is truly the #1 choice for anyone in West TN and surrounding area in need of hydraulic pumps or rework. I’m very thankful Case IH has partnered with this family for our cotton team work. I highly recommend them!!”
-Amanda Robinson Bell, Case IH
Industrial
Moore Pumps is your go to source to keep your machines running and making you money, not sitting idle waiting on pumps, valves, or parts from the manufacturer of the machine.
Moore Pumps stocks most any pump, motor, or valve for the injection molding industry. We stock Vickers MHT motors, Staffa motors, Vickers and Denison pumps for most any injection molding machine. We also stock Bosch, Rexroth, and Vickers proportional valves, as well as EHST valves. These are just a few of the hundreds of valves we have in stock. We also stock pumps and valves for most any large press regardless of the application.
Construction
The construction industry is no different than any other business when it comes to down time. Builders have deadlines that must be met. Moore Pumps helps keep your equipment on the job, not in the shop. We stock pumps for many equipment manufacturers including Caterpillar, Komatsu, Hitachi, and Case.
Cylinder leaking? Everyone knows an oil leak will get you shut down on many job sites. Moore Pumps offers cylinder repairs at a fraction of the cost of manufacturer dealerships. Some cylinders require 20 to 30 thousand foot pounds of torque to remove the nut from the cylinder rod. Our machine can achieve up to 50 thousand foot pounds. Moore Pumps can dis-assemble, and properly re-assemble any cylinder for any piece of construction equipment.
Agriculture
The Moore family has been involved in agriculture for five generations. We understand how critical down time can be in any farming operation from planting, to spraying, to harvesting.
Moore Pumps keeps in stock, ready for immediate shipment, pumps and motors for most planters, and spray rigs. As well as hundreds of hydrostatic pumps and motors to fit every John Deere, and Case IH, combine, or cotton picker manufactured in the last 25 years. We have a hydro for everything from the old 715 IH Combine to the new John Deere CP690 and CS690 Cotton Picker.
Cotton Gins
Moore Pumps, Inc. stocks all Hydraulic Pumps for Lummus, Murry, Continental-Best, & Doorless Liftbox Presses. We also stock PTO Pumps and Travel Motors for Module Builders. All units are in stock and ready for immediate shipment.
We at Moore Pumps, Inc. understand that downtime can be critical for any Ginning Operation. Feel free to use our Emergency After Hour Lines for Immediate Assistance Day or Night.
INDUSTRIAL
CONSTRUCTION
AGRICULTURAL
COTTON GINS
x
From: I-40 EAST BOUND
Take I-40 East to exit #56. (Brownsville)
Turn left at end of ramp. (Hwy 76 North)
Go 2.7 miles to a 4-way stop and turn right.
Continue on this street 2.4 miles (past Walmart, thru traffic light) until it ends. Then turn left on Hwy 79.
Go 1.1 miles to a traffic light at the intersection of Hwy 54. Turn right on Hwy 54 North.
Proceed 15.4 miles to the stop sign at the intersection of Hwy 88.
Turn right on Hwy 88 go only about 100 feet and turn left on Hwy 188.
(Use extreme caution here, this is a very dangerous intersection)
Travel 1.4 miles on Hwy 188 to the intersection of Hwy 188 and Hwy 412. You will take Hwy 412 West. You must cross over Hwy 412 to reach the westbound access ramp.
Proceed west on Hwy 412 for 7.4 miles.
When you see a gas station on the left, we will be 200 yards past it on the right. A gray and white building with a big Moore Pumps sign and a huge American flag in front of the building .
If you get to the Dyer County line, you have gone too far. You need to wake up, turn around, and start paying attention.
From: I-40 WEST BOUND
Take exit #79 Go to end of ramp and turn right.
This will be Hwy 412 west.
We are exactly 28.8 miles from I-40.
When you see a gas station on the left, we will be 200 yards past it on the right. A gray and white building with a big Moore Pumps sign and a huge American flag in front of the building.
If you get to the Dyer County line, you have gone too far. You need to wake up, turn around, and start paying attention.
From: I-55 NORTH OR SOUTH
Take exit #18 to Dyersburg, Tennessee.
This will be I-155 East, and it will also be Hwy 412 East.
Proceed on this highway across the Mississippi River and into Tennessee.
After entering Tennessee, you will travel about 14.5 miles to the I-155 and Hwy 412 split.
Take Hwy 412 East toward Jackson, Tennessee. You will exit off to your right.
Continue on Hwy 412 East for 13.5 miles.
When you get to the Crockett County line, you will be at the top of a long hill. Our building is at the bottom of this hill on the left.
A gray and white building with a big Moore Pumps sign and a huge American flag in front of the building.
If you get to the gas station on the right, wake up, pay attention, and turn around. You have gone too far.
• Free evaluations
• Pumps, motors and valves assembled to order
• All units tested to 100% rated flows and pressures
• Remanufactured units come with a 1 year warranty
• Discounts up to 80% off list price on exchange units
• Discounts up to 68% off list price to purchase outright
• All brands and models listed are in stock
DIRECTIONS
9842 Highway 412
Friendship, TN
38034